How To Use Slime Tire Repair Kit

When flat tires occur in our riding lawn mowers, tractors, trailers, ATVs/UTVs, dirt bikes, wheelbarrows and other non-highway tires, we always accomplish for our trusted Slime tire sealant (stops flats for ii years!). Merely some gashes and slashes are too large for sealant to seal, so you lot need to patch your tire instead.

Patching a tire is easy, and with the right tools, tin can speedily get your tire back in working order. There are many patch kits out at that place that include all the pieces you need to successfully patch a tire, or if you already have some of the items beneath on hand, you lot tin can supplement with the individual supplies as needed. Permit's get started:

Supplies:

• Tire mark
• Scuffer
• Tire patch of the advisable size
• Safety cement
• Buffer tool for stitching

Step 1: Utilise your tire mark to mark the spot that you lot want to patch.

Stride 2: Employ the scuffer tool to crude upward the offending expanse with a crosshatch pattern. Don't be shy with the tool. The patch adheres amend to a crude surface. Make sure surface area within 1/2" (1.25 cm) of puncture has roughened appearance. Wipe away whatsoever loose rubber pieces that formed during the scuffing.

Step iii: Utilize rubber cement direct to the roughened surface of your tire and spread evenly. Piece of work into fabric and expect until tacky. You can also apply rubber cement to the patch instead (provided y'all starting time remove the backing of the patch – come across Step 4).

Step iv: Remove the backing from your patch without touching the exposed surface. If the patch comes with a thin plastic film on elevation, do not remove. Position the patch correctly over the puncture location. Radial patches tin can go in whatever position on the radial tire. Bias tires require that patches are specifically aligned with the bead. Look for arrows that indicate how y'all should align the patch with the bead of the tire.

Step 5: Press the patch firmly over the puncture surface area, being sure to press downwards the edges. Use the buffer tool to stitch the patch down and force out any trapped air. Afterwards ensuring the edges of the patch are firmly fastened, and then remove the articulate plastic backing from the patch.

Footstep 6: Wait for the patch to completely dry out, then remount the tire and air up. Congratulations, y'all have successfully patched a tire!

Please note: This weblog is specifically about patching a non-highway tubeless tire. Please take all automotive highway tires to a professional repair shop for a U.S. Tire Manufacturers Association approved tire plug or patch. If you are looking for instructions on how to patch a tube, click here.

Source: https://slime.com/pages/how-to-patch-a-tire

Posted by: hernandezpoid1988.blogspot.com

Share this post