How To Repair Large Chip In Porcelain Sink

Download Article

Download Commodity

If you've noticed a flake or crack in your ceramic sink, don't worry! You lot tin use epoxy for a quick and easy way to repair the surface. In this article, we'll walk you through the entire process, starting with how to clean and prep the ceramic surface. And then, nosotros'll explain how to mix and apply epoxy to fill up in any minor cracks and fries. If you're gear up to fully restore your ceramic sink and so it looks brand new again, read on.

1. i

   Sand the edges of the chip or crevice to smooth them out. Use a very fine-grit sandpaper, such as 400-dust sandpaper. Lightly rub a slice of sandpaper dorsum and forth over the damaged expanse, feeling it with your fingertips equally you go, until you don't feel whatsoever sharp edges.^[one]

   • You can skip this if the damage is very pocket-sized, such every bit a hairline crack that doesn't have sharp edges.

2. 2

   Clean the area to remove any loose debris from the chip or crack. Scrub the damaged expanse with an abrasive cleaner similar Ajax and a scrubbing pad or the scrubbing side of a sponge. Rinse the sink thoroughly with water from the tap.^[2]

   • This will ensure a clean surface for the chip and scissure filler to attach to and class a stiff bond.

   Tip: You tin can use the sharp tip of a pin or needle to scrape out hairline cracks or brush very minor chips out with an onetime potent-bristled toothbrush to remove any pieces of ceramic or dirt that are stuck in them.

   Advertisement

3. iii

   Wipe the sink downwardly with a towel and permit it dry for at least 1 hour. Use a paper towel or a clean absorptive cloth to wipe away all the excess moisture in the sink after rinsing it. Get out the sink to air dry for at to the lowest degree ane hour earlier yous use the repair epoxy.^[3]

   • Don't ever use scrap repair epoxy to a moisture surface or information technology will not cure correctly.

Advertisement

1. 1

   Buy a porcelain and ceramic epoxy chip repair kit. Buy a generic white repair kit if your ceramic sink is a standard white color. Become a kit that allows you to mix pigments to create custom colors if your sink is an fair color.^[4]

   • Porcelain and ceramic bit repair kits come with 2 vials containing liquids that you mix together to create the epoxy filler, as well every bit a castor you can use to mix and apply the product.
   • You can buy these repair kits at a home improvement eye, hardware store, or online.

2. 2

   Mix together the 2 parts of the epoxy scrap repair kit. Open up the package and gear up the rigid plastic front piece on a flat piece of work surface to use as a mixing tray. Empty the contents of both vials into the tray, using the provided brush to scrape out whatever liquid that sticks in the vials. Employ the brush to mix the liquids thoroughly in the tray for at least 1 minute.^[5]

   • Read the instructions on the packaging and defer to the manufacturer's instructions for any specific directions about how to mix the epoxy.

   Tip: If you purchased a kit that has pigments you can utilize to alter the color of the epoxy, mix in the appropriate color of pigment 1 drop at a time until you go a match. For example, if your sink is light green, mix in a drop of green pigment until the epoxy looks like the right color.

3. 3

   Let the epoxy sit at room temperature for 30 minutes. Leave the tray with the mixed epoxy sitting on your work surface for half an hr and then the epoxy starts to cure. This will make it thicker and easier to apply to fill in chips and cracks.^[vi]

   • Again, defer to the manufacturer's instructions for the specific repair product you purchased for directions about exactly how long to expect before applying the epoxy.

Advertizing

1. one

   Use the kit's brush to apply a thin glaze of epoxy to hairline cracks. Dip the tip of the castor into the tray to cover it in epoxy. Carefully brush the epoxy into the crack or chip, spreading information technology to the edges and being conscientious not to become it onto the surrounding surface of the sink.^[7]

   • If y'all apply too much epoxy and get it on the area effectually the crack, wipe away the excess with a moisture paper towel.

2. 2

   Button epoxy into deeper gouges and chips. Use the tip of the repair kit's castor or a toothpick to scoop up a dab of epoxy. Push the epoxy into the bit with the brush or toothpick without overfilling information technology.^[viii]

   • Don't worry nigh making the scrap level with the sink with the first layer of epoxy. Yous tin continue applying layers until you get it merely right.

3. 3

   Expect 45 minutes for the first glaze of epoxy to set. Leave the sink lone for 45 minutes once you're happy with how the first coat looks to let it cure. Brand certain nobody uses the sink if at that place is anyone else around.^[9]

   • You could write a warning sign and tape it over the sink to ensure nobody uses information technology while the epoxy dries if this is a business organization.

4. 4

   Utilize a second glaze of epoxy using the kit's brush. Dip the tip of the brush dorsum into the tray with the epoxy. Gently castor another layer of epoxy onto the repaired cleft or button it into the repaired bit to finish filling in the impairment.^[10]

   • Most minor cracks and chips only need ii layers of epoxy to fill them in. However, if you are repairing a deeper gouge, you can employ more than coats as necessary.

   Tip: You can utilise the border of an one-time credit card to smooth out the epoxy and embrace the edges of the crack or scrap to blend it in with the surrounding surface.

5. 5

   Let the epoxy dry for 24 hours. Don't use the sink for a total 24 hours later on you lot apply the terminal glaze of epoxy. The epoxy needs time to cure without getting wet in order to bond permanently to the repaired surface area.^[11]

6. 6

   Sand the repaired expanse with fine-grit sandpaper. Apply 400-grit or finer sandpaper to smooth out the repaired area until it is composite in and even with the residuum of the sink. Rub the sandpaper lightly back and forth over the chip or crevice and run your fingertips over it as you go until information technology feels completely smooth.^[12]

   • After y'all level out the repaired area, yous tin can moisten your sandpaper or go the area wet and cease sanding it to shine it up and assist blend it in with the rest of the surface.

Advertisement

References

Add together New Question

• Question

  What'south the best way to clean a ceramic sink?

  

  Melanie Garcia is the Co-Owner of Oranges & Lemons, a pocket-size, family cleaning business organisation based in Downtown Los Angeles, California (DTLA) in operation for over 40 years. Oranges & Lemons operates while partnering with the National Domestic Workers Alliance and Mitt in Mitt: Domestic Employers Network.

  

  Professional Business firm Cleaner

  Practiced Reply

  

  Back up wikiHow by unlocking this expert respond.

  Go a balmy cleanser, similar Bar Keeper's Friend. Rub the cleanser over the ceramic and use a sponge to scrub any stains or dirt away. And then, merely rinse the area off. You tin echo this process whatever number of times until you sink is blemish-free.

Ask a Question

200 characters left

Include your email address to become a message when this question is answered.

Submit

Ad

Things You'll Need

• 400-grit sandpaper
• Paper towels
• Scrubbing pad or sponge
• Abrasive cleaner
• Porcelain and ceramic epoxy repair kit
• Toothpick (optional)

Almost This Article

Thanks to all authors for creating a page that has been read xx,637 times.

Did this commodity help you?

Source: https://www.wikihow.com/Fix-a-Ceramic-Sink

Share this post